Our aviation - aerospace firesleeve is made with an extra thick coating of high-temperature silicone rubber over a dense braided E-type fiberglass sleeve.
Our aviation firesleeve is constructed to SAE AS1072, and allows qualified hose assemblies to meets the fire resistance requirements of FAA TSO - C53a (fuel and Oil system hose assemblies), TSO-C42 (ppropeller feathering hose assemblies) and TSO - C75 (hydraulic hose assemblies).

It may be used for all fuel, oil, hydraulic, fire extinguisher and prop feathering lines.  "Fire-proof" hose assemblies, as defined by the FAA, must withstand a direct flame for 15 minutes under specific flow conditions without failure.  Fire-resistant lines must withstand a 5 minute exposure under these conditions.

Fire-proof hose lines are obtained when the proper size firesleeve is selected and properly assembled with appropriate clamps.

Most Marine inspectors will accept the AS1072 Aviation Firesleeve for the protection of Marine Hydraulic and Fuel lines.

Our firesleeve products at a glance...
Industrial Firesleeve
Firesleeve Tape
Aviation Firesleeve
Firesleeve with Velcro
Firesleeve FireBlanket
Firesleeve End Wrap Tape
Aerospace, Aviation and Marine AS1072 Firesleeve
(allows qualified assemblies to meet AS1055D)
Industrial Firesleeve Hose Wire Cable Protection
Discount Pricing shown on
this site is for On-Line &
E-invoice orders only.
Firesleeve and our other silicone rubber coated fiberglass  (fibreglass) materials withstands 500°F / 260°C continuous exposure; Molten Splash at 2200°F / 1205°C for periods up to 15 minutes and short excursions to 3000°F / 1650°C.

The firesleeve on this site can be used as a firejacket or as a fire sleeve to protect all classes of hoses, wires  and cables in any usage; such as marine firesleeve, industrial firesleeve and aviation firesleeve.
High Temperature Heat Flame Resistant Silicone Rubber Coated Fiberglass Firesleeve
High Temperature Heat Flame Resistant Silicone Rubber Coated Fiberglass Aerospace Firesleeve
High Temperature Heat Flame Fire Resistant Silicone Rubber Coated Fiberglass Tape
Silicone Rubber Self Fusing Tape End Wrap
High Temperature Heat Flame Resistant Silicone Rubber Coated Fiberglass Cloth Fabric Fireblanket
High Temperature Heat Flame Resistant Silicone Rubber Coated Fiberglass Firesleeve with Velcro
Our firesleeve sleeve, jacket, tape and fabric products are perfect for protecting hydraulic hoses, pneumatic lines, electrical cables, control wiring, welding cables, electric arc furnace cables, etc., from high-temperatures, heat, flame & pyro exposure, molten metal splash, slag, welding splatter, grinding & electrical sparks and environmental contaminations.